Profile cylinder lock 30/30 for daily use with normal security requirements.
Technical specifications:
Item number TZ-10-10 (for industrial gate)
Item number TZ-10-11 (for Ben Light gate)
Item number TZ-10-10 (keyed alike)
Triangular profile cylinder lock 30/30.
Technical specifications:
Item number TZ-10-13 (steel)
Accessory for the triangular profile cylinder.
Item number TZ-10-14 (steel)
Tubular frame lock with V2A faceplate – backset 22 mm suitable for Ben Light, Straight Line, Alfi forged and Carlos gate systems. The lock striker plate can be adjusted to DIN L and DIN R.
Technical specifications:
Item number TZ-13-10 (galvanized)
Mortise lock case for our industrial gate. The lock striker plate can be adjusted to DIN L and DIN R.
Item number TZ-13-11 (galvanized)
Mortise lock case for our industrial gate. The lock striker plate can be adjusted to DIN L and DIN R.
Item number TZ-13-12 (galvanized)
Mortise lock case for our sliding gates.
Item number TZ-13-13 (galvanized)
Aluminum handle set for our Ben Light gate including escutcheon and lock.
Item number TZ-12-10-30 (aluminum)
Aluminum handle for our Ben Light gate.
Item number TZ-12-11-30 (aluminum)
Aluminum handle escutcheon for our Ben Light gate, rectangular 8 mm.
Technical specifications:
Item number TZ-12-12-30 (aluminum)
Aluminum escutcheon for profile cylinder Ben Light gate, rectangular 5 mm.
Technical specifications:
Item number TZ-12-13-30 (aluminum)
Aluminum handle set for our industrial gate including fastening material.
Item number TZ-12-14-30 (aluminum)
One of the highest quality stop angles as a 2-piece set. The stop can be adjusted individually.
The stop is always hot-dip galvanized. Optionally, it is powder-coated in RAL 7016 anthracite or RAL 6005 moss green.
Technical specifications:
Item number TZ-11-10-50 (hot-dip galvanized)
Item number TZ-11-10-54 (RAL 7016)
Item number TZ-11-10-51 (RAL 6005)
One of the highest quality stop sets with an electric opener. The stop is made of steel and hot-dip galvanized. Optionally, it is then powder-coated in anthracite or moss green.
Technical specifications:
Item number TZ-11-11-50 (hot-dip galvanized)
Item number TZ-11-11-54 (RAL 7016)
Item number TZ-11-11-51 (RAL 6005)
Ben Light gate L fiche hinge M12 suspension set including shims and nuts
Item number TZ-14-10 (galvanized)
Ben Light gate L fiche hinge M12
Item number TZ-14-11 (galvanized)
Industrial gate suspension set M16 x 30 including eye screw, bolts, nuts, shims and splint
Item number TZ-15-10 (galvanized)
Eye screw for the industrial gate suspension
Item number TZ-15-11 (galvanized)
Bolt matching the eye screw of the industrial gate suspension.
Item number TZ-15-12 (galvanized)
Vario suspension set for the industrial gate including suspension bracket, vario plate and screw.
Item number TZ-15-13-50 (hot-dip galvanized)
Item number TZ-15-13-54 (RAL 7016)
Item number TZ-15-13-51 (RAL 6005)
Vario suspension bracket for the industrial gate.
Item number TZ-15-14-50 (hot-dip galvanized)
Item number TZ-15-14-54 (RAL 7016)
Item number TZ-15-14-51 (RAL 6005)
Wall mounting plate for our Ben Light gate. M12 bolt anchors are also required.
Technical specifications:
Item number TZ-16-10-50 (hot-dip galvanized)
Item number TZ-16-10-54 (RAL 7016)
Item number TZ-16-10-51 (RAL 6005)
Wall mounting plate for the vario industrial gate. M12 bolt anchors are also required.
Technical specifications:
Item number TZ-16-11-50 (hot-dip galvanized)
Item number TZ-16-11-54 (RAL 7016)
Item number TZ-16-11-51 (RAL 6005)
Approximately 56 cm long locking bolt for double wing gates. Made of steel and then hot-dip galvanized.
Item number TZ-17-10-50 (galvanized)
Gate stop for leaf gates to be set in concrete.
Technical specifications:
Item number TZ-17-11-50 (galvanized)
Gate stop clamping pin made of stainless steel
Item number TZ-17-12-40 (stainless steel)
Case for the gate stop, approximately 20 cm long with a hole for the gate stop approximately 2.4 x 4 cm.
Item number TZ-17-13-50 (galvanized)
Large roller block for sliding gates up to 600 kg.
Item number TZ-18-10 (galvanized)
Small roller block for sliding gates up to 450 kg.
Item number TZ-18-11 (galvanized)
Glass fiber reinforced plastic rack with steel core, can be extended as required. Suitable for all standard sliding gate systems, very smooth-running.
Technical specifications:
Item number TZ-18-12 (galvanized)
Sliding gate drive for gates up to 8 m or 400 kg. The gate opening speed can be set individually and also enables partial opening. The motor is housed in a small, compact aluminum housing.
Item number TZ-19-10-60 (aluminum)
Revolving gate drive for gates up to a leaf width of 2.5 m and a leaf height of 2 m. The opening time is between 15 and 25 seconds. The leaf weight can be a maximum of 200 kg.
Item number TZ-19-11-60 (aluminum)
2-command handheld transmitter for Marantec gate drives
Item number TZ-19-13-60 (aluminum)